Application Rates for Monty's Plant Food

Crop	Liquid Carbon Soil Conditioner	4-15-12 Seed Starter	8-16-8 Growth Formula	2-15-15 Root & Bloom
Alfalfa	Prior to Planting or Early Season at Green-Up: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been broadcast. "Winterizer" Application: Should be applied at a rate of 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can also be applied along with Liquid Carbon Soil Conditioner.	Early Spring Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water when spring growth is 4" to 6" inches tall. If cost effective, a follow-up application can be applied at the same rate as above, 2 to 3 weeks later. In-season Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water 5 to 10 days after every cutting or when there is 4" to 6" of re-growth.
Apples	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water, focusing on areas around tree, from drip line in.	When Starting From Seed: Pre-treat seed by soaking or spraying with a Monty's/Water dilution of 8 to 16 ounces per 100 gallons of water. You can also drench the medium in which the seeds are being started. This would be the same dilution rate as previously mentioned.	First and Follow-Up Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application should be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) These applications should be followed from early spring through flowering stage. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.	Flowering Stage Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application should be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) These applications can be followed from the flowering stage through harvest. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.
Austrian Winter Peas	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from the flowering stage through mid-pod stage.
Barley	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 8 ounces in 3 to 8 gallons of water or 16 to 24 ounces in 9 to 15 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Follow Up Applications to be determined by crop need. A second foliar application may prove to be beneficial.	Optional Application At Boot Stage: 16 to 24 ounces of 8-16-8 per acre in a suggested 5 to 7 gallons of water during an aerial application when driving through the field is not an option. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations)
Cabbage	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	When Starting From Seed in Greenhouse or Cold Frame: Pre-treat seed by soaking or spraying with a Monty's/Water dilution of 8 to 16 ounces per 100 gallons of water. You can also drench the medium in which the seeds are being started. This would be the same dilution rate as previously mentioned.	"At Transplanting" Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. First Foliar Application: Once plants have reached the 3 to 4 inch height. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Follow Up Applications to be determined by crop need. A second foliar application is suggested 3 weeks after first foliar application. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.	Late Foliar Application: Two to three weeks prior to harvest, apply 16 to 24 ounces at a suggested rate of 15 to 20 gallons of water. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.
Canola	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 8 ounces in 3 to 8 gallons of water or 16 to 24 ounces in 9 to 15 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Follow Up Applications to be determined by crop need. A second foliar application may prove to be beneficial.	Optional Application: 16 to 24 ounces per acre in a suggested 5 to 7 gallons of water during an aerial application when driving through the field is not an option. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations)
Chrysanthemums	Field Grown Mums Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest. Container Grown Mums See the use with Seed Starter to follow	When Starting From Seed or Cutting in Greenhouse: Pre-treat seed or cutting by soaking or spraying with a Monty's/Water dilution of 8 to 16 ounces per 100 gallons of water. You can also drench the medium in which the seeds or cuttings are being started, at a rate of 8 to 16 ounces per 100 gallons of water. Soil Conditioner can also be added to this soil drench application at the same rate, 8 to 16 ounces per 100 gallons of water.	"At Transplanting" Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. First Foliar Application: Once plants have reached the 3 to 4 inch height. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Follow Up Applications to be determined by crop need. A second foliar application is suggested 3 weeks after first foliar application. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.	Bloom Stage Applications: At first bud through bloom stage, apply 16 to 24 ounces at a suggested rate of 15 to 20 gallons of water. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations). Multiple applications will prove beneficial. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.
Coffee	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. Follow-Up foliar applications may prove to be beneficial every 3 to 4 weeks.	Bean Stage Application: Once beans begin to develop, apply 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations)
Cotton	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from the flowering stage through mid-boll stage.
Corn	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to Tassel stage to be determined by crop need. A second foliar application may prove to be beneficial.	Tassel Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from 2 to 3 weeks prior through Teaseling stage.
Dry Beans	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from the flowering stage through mid-pod stage.
Dry Peas	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from the flowering stage through mid-pod stage.
Flax Seed	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from the flowering stage through mid-pod stage.
Forage Crop for Cutting	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, prior to dormancy.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in a suggested 15 to 20 gallons of water, after seed has been broadcast. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is early spring at green up with 2 to 4 inches of growth. Follow Up Application: is suggested at the same rate as above 2 to 3 weeks after first foliar application. In-Season Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for these application is after every cutting with 2 to 4 inches of re-growth.	Winterization Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) Ideal time for this application is late fall, prior to dormancy. Suggested to be applied along with Liquid Carbon Soil Conditioner. On Alfalfa, see Alflafa Suggestions
Forage Crop for Grazing	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, prior to dormancy.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in a suggested 15 to 20 gallons of water, after seed has been broadcast. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is early spring at green up with 2 to 4 inches of growth. Follow Up Application: is suggested at the same rate as above 2 to 3 weeks after first foliar application. In-Season Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for these application is every 30 days.	Winterization Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) Ideal time for this application is late fall, prior to dormancy. Suggested to be applied along with Liquid Carbon Soil Conditioner.
Fruit Trees	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water, focusing on areas around tree, from drip line in.	When Starting From Seed: Pre-treat seed by soaking or spraying with a Monty's/Water dilution of 8 to 16 ounces per 100 gallons of water. You can also drench the medium in which the seeds are being started. This would be the same dilution rate as previously mentioned.	First and Follow-Up Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application should be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) These applications should be followed from early spring through flowering stage. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.	Flowering Stage Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application should be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) These applications can be followed from the flowering stage through harvest. Applications through Drip or Tape Irrigation: Apply at a rate of 8 to 16 ounces per 100 gallons of water, on a minimum of bi-weekly feed basis.
Gaoliang (Sorghum)	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to Bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Bloom Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from throughout the flowering stage.
Garbanzo Beans	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to Bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Bloom Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied from throughout the flowering stage.
Hay Crops for Cutting	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, prior to dormancy.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in a suggested 15 to 20 gallons of water, after seed has been broadcast. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is early spring at green up with 2 to 4 inches of growth. Follow Up Application: is suggested at the same rate as above 2 to 3 weeks after first foliar application. In-Season Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for these application is after every cutting with 2 to 4 inches of re-growth.	Winterization Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) Ideal time for this application is late fall, prior to dormancy. Suggested to be applied along with Liquid Carbon Soil Conditioner. On Alfalfa, see Alflafa Suggestions
Hay Crops for Grazing	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, prior to dormancy.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in a suggested 15 to 20 gallons of water, after seed has been broadcast. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is early spring at green up with 2 to 4 inches of growth. Follow Up Application: is suggested at the same rate as above 2 to 3 weeks after first foliar application. In-Season Applications: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for these application is every 30 days.	Winterization Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) Ideal time for this application is late fall, prior to dormancy. Suggested to be applied along with Liquid Carbon Soil Conditioner.
Legumes	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied throughout flowering stage.
Lentils	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied throughout flowering stage.
Millet	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied throughout flowering stage.
Mustard Seed	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water, however your planting equipment allows. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	Flowering Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied throughout flowering stage.
Oats	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 8 ounces in 3 to 8 gallons of water or 16 to 24 ounces in 9 to 15 gallons of water. "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into the first post emergence herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Follow Up Applications to be determined by crop need. A second foliar application may prove to be beneficial.	Optional Application: 16 to 24 ounces per acre in a suggested 5 to 7 gallons of water during an aerial application when driving through the field is not an option. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations)
Peanuts	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late fall, after harvest.	"Prior To" Planting Application: Can be applied to the soil prior to planting at a rate of 24 ounces per acre, if it is applied along with 64 to 128 ounces of Liquid Carbon Soil Conditioner per acre in a suggested 15 to 20 gallons of water. BEST - "At" Planting Application: If your planting equipment allows moisture to be applied to the seed as it goes in the ground, apply at a rate of 24 ounces in 3 to 15 gallons of water. Applied "To The Seed" "Post" Planting Application: Can also be applied at the rate of 24 ounces per acre in acre in a suggested 15 to 20 gallons of water, after seed has been planted. Also most effective if applied with Liquid carbon Soil Conditioner.	First Foliar Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs, to avoid an extra pass in the field. (See Monty's / Herbicide Application Recommendations) Ideal time for first application is fourth leaf stage. Follow Up Applications prior to bloom stage to be determined by crop need. A second foliar application may prove to be beneficial.	"Pegging" Stage Application: 16 to 24 ounces per acre in a suggested 15 to 20 gallons of water. This application can be incorporated routinely into herbicidal, fungicidal, and pesticide spray programs. (See Monty's / Herbicide Application Recommendations) This application can be applied during "pegging" stage throughout flowering stage.
Pinto Beans	Applications based on need: After soil testing, apply 64 to 128 ounces per acre in a suggested 15 to 20 gallons of water. This application can be made early spring, prior to planting or late f